VS Nintendo Multigame Kits for Original Nintendo VS Hardware
Upgrade documented compatible original Nintendo VS System arcade hardware with a multigame kit designed for VS Red Tent, VS Dual Screen Upright, or VS Unisystem cabinet configurations. These kits add convenient game switching and expanded game selections while continuing to run on the original Nintendo VS PCB hardware.
These are original-hardware multigame upgrades, not emulation platforms, reproduction boards, or generic multicade replacements. Game availability depends on the installed Nintendo PPU and selected Game Pak, so identify your cabinet, PCB configuration, CPU, and PPU before ordering.
VS Nintendo Multigame Upgrade Options
Two VS Nintendo multigame configurations are available for different original Nintendo cabinet setups. Choose the version that matches your cabinet and the way you want to use the original VS hardware.
- Designed for documented compatible original Nintendo VS System arcade PCBs
- Separate kits for VS Red Tent / Dual Screen Upright and VS Unisystem Upright cabinets
- Runs supported Nintendo VS games on original arcade hardware with no emulation
- Game selection is controlled directly from the cabinet control panel
- Game availability depends on the installed PPU and selected Game Pak
- Supported PPU references include 0001, 0002, 0003, 0004, and 2C03B
- Red Tent / Dual Screen configurations support up to 8 games per side and up to 16 total games
- Unisystem base configuration supports up to 8 games with optional expansion for additional supported installations
- Head-to-head and supported 4-player games are available with compatible Red Tent / Dual Upright Game Pak configurations
- Supported gun games include Hogan's Alley and Duck Hunt with the required hardware configuration
- Optional NES Zapper Adapter support is available
- Original program EPROMs can be removed as documented when using the selected Game Pak configuration
Control-Panel Game Switching
Both kits allow supported games to be changed from the cabinet controls without opening the machine, but the button combinations differ by cabinet configuration.
On the VS Red Tent / Dual Screen Upright kit, hold Player 4 and move the joystick left or right to change games on that side. Holding Player 4 for approximately five seconds provides the documented coin-up shortcut.
On the VS Unisystem Upright kit, hold Player 2 and move the left-side joystick left or right to change games. Hold Player 1 plus Button A for the documented coin-up shortcut. Supported Side A / Side B selection is performed by holding Player 1 and moving the joystick left or right.
Verify Nintendo VS Compatibility Before Ordering
- Identify whether you have a VS Red Tent, VS Dual Screen Upright, or VS Unisystem Upright cabinet.
- Verify that your machine contains a compatible original Nintendo VS PCB.
- Identify the installed PPU before selecting a Game Pak.
- Supported PPU references shown for these products are 0001, 0002, 0003, 0004, and 2C03B.
- The required CPU and PPU must be supplied from your original hardware.
- Game availability changes depending on the PPU and Game Pak combination selected.
- Gun-game support requires the correct daughter-card and gun configuration.
- Tetris and certain other titles require the correct original PCB DIP-switch palette settings.
- Review the installation guide for the exact kit before removing the CPU, PPU, program EPROMs, ribbon cables, or other components.
Read more below
VS Nintendo Multigame Kit Details and Benefits
HighScoreSaves offers two Nintendo VS multigame configurations for documented compatible original Nintendo arcade hardware: one for VS Red Tent and VS Dual Screen Upright cabinets, and another for the VS Unisystem Upright cabinet.
Both kits retain the original Nintendo VS PCB platform, CPU, PPU, controls, sound, video, and game behavior while adding convenient control-panel game selection and expanded Game Pak support. The correct product depends on the cabinet style, installed PPU, desired games, and whether dual-screen, head-to-head, or gun-game functionality is required.
Main VS Nintendo Multigame Features
- Original Nintendo VS hardware: Runs supported games on documented compatible original Nintendo VS arcade PCBs.
- No emulation: Preserves original gameplay timing, controls, sound, and video.
- Multiple games: Supports up to 8 games per daughter card depending on PPU and Game Pak selection.
- Expanded installations: Supported dual-side configurations can provide up to 16 total games.
- Control-panel switching: Change supported games without opening the cabinet.
- PPU-specific Game Paks: Game availability is matched to the PPU installed on the original PCB.
- Head-to-head support: Available on compatible Red Tent / Dual Upright game and Game Pak configurations.
- 4-player support: Available for compatible titles such as Wrecking Crew, Balloon Fight, and Tennis with the correct setup.
- Gun-game support: Compatible configurations can run Hogan's Alley and Duck Hunt.
- Zapper option: NES Zapper use requires the appropriate adapter.
- EPROM support: Original program EPROMs may be removed as documented for supported Game Pak operation.
- Original palette behavior: Games such as Tetris and Battle City may require the correct original PCB DIP-switch color settings.
Choose the Correct VS Nintendo Multigame Kit
VS Red Tent | VS Dual Screen Upright Multigame Kit
Choose this version for a documented compatible original Nintendo VS Red Tent or VS Dual Screen Upright cabinet. The system supports up to 8 games per side and up to 16 total games depending on the installed PPUs and selected Game Paks.
- VS Red Tent and VS Dual Screen Upright cabinets only
- Up to 8 games per side and 16 total games
- Head-to-head play on supported titles
- Supported 4-player operation on compatible titles and Game Paks
- Independent reset capability for each side
- Optional Zapper Adapter support
- Control-panel game switching using Player 4 plus joystick direction
VS Nintendo Unisystem Upright Multigame Kit
Choose this version for a documented compatible original Nintendo VS Unisystem Upright. The base configuration uses one daughter card for up to 8 supported games, with an optional second daughter card available for expanded installations.
- Designed specifically for the VS Unisystem Upright cabinet
- Base configuration supports up to 8 games
- Optional second daughter card for expanded dual-side configurations
- Two CPUs and two PPUs are required when operating both sides
- Gun-game configurations require the optional second daughter card
- Supports original VS gun, HAPP 45, or NES Zapper with the required adapter
- Control-panel game switching using Player 2 plus joystick direction
PPU and Game Pak Selection
Nintendo VS game compatibility is tied closely to the PPU installed on the original arcade PCB. The Game Pak selected when ordering must match the supported PPU configuration.
Current product configurations document support for PPU references 0001, 0002, 0003, 0004, and 2C03B. The PPU identification number is normally printed on the chip and may be located underneath a heatsink.
Depending on PPU, cabinet, and Game Pak selection, supported titles can include Super Mario Bros., Excitebike, Mighty Bomb Jack, Pinball, Battle City, Tetris, Skate Kid, Mach Rider, Slalom, Golf, Soccer, Clu Clu Land, Ice Climber, Ninja Jajamaru Kun, Star Luster, Wrecking Crew, Balloon Fight, Tennis, Hogan's Alley, and Duck Hunt.
Not every title is available with every PPU or Game Pak configuration. Verify your PPU first, then choose the corresponding Game Pak when ordering.
Game Switching, Coin-Up, Head-to-Head, and Gun Controls
Red Tent | Dual Screen Upright Controls
On the documented right-side control panel, hold Player 4 and move the joystick left or right to change games on that side. Hold Player 4 for approximately five seconds for the documented coin-up shortcut.
Compatible Game Paks can also provide head-to-head and supported 4-player operation. Titles documented for these configurations include Wrecking Crew, Balloon Fight, and Tennis.
Unisystem Upright Controls
Hold Player 2 and move the left-side joystick left or right to change games. Hold Player 1 + Button A for the documented coin-up shortcut.
To change between supported PCB sides, hold Player 1 and move the joystick left for Side B or right for Side A.
Gun-Game Support
Compatible configurations support Hogan's Alley and Duck Hunt. Original VS gun hardware, a compatible HAPP 45, or an NES Zapper with the required adapter may be used depending on the selected kit and installation. Review the exact product configuration before ordering.
Installation and Nintendo VS Hardware Requirements
- Designed only for documented compatible original Nintendo VS arcade PCBs.
- Select the kit that matches your Red Tent, Dual Screen Upright, or Unisystem Upright cabinet.
- You must supply the required original CPU and PPU hardware.
- The Unisystem installation uses a PPU/CPU daughter card, edge-connector card, and ribbon cable.
- A second CPU and PPU are required when a supported second-side configuration is installed.
- Original program EPROMs are removed from the documented locations when using the applicable multigame configuration.
- Game Pak selection must match the installed PPU.
- Gun games may require an additional daughter card and/or Zapper Adapter.
- Certain games require the correct original PCB DIP-switch palette configuration.
- Review the correct installation guide before removing the CPU, PPU, program ROMs, connectors, or ribbon cables.
Wi-Fi and High Score Saving
The current VS Nintendo Red Tent / Dual Upright and Unisystem product pages are presented as original-hardware multigame systems and do not list a Wi-Fi-enabled leaderboard option.
They also do not currently list HighScoreSaves permanent high-score saving as a product feature. For that reason, this category should describe these products as VS Nintendo multigame kits rather than promising high-score-save or Wi-Fi functionality that is not shown on the current product pages.
VS Nintendo Multigame Kit FAQ
Which VS Nintendo multigame kit do I need?
Choose the Red Tent / Dual Upright product for those dual-screen cabinet configurations. Choose the Unisystem product for the original Nintendo VS Unisystem Upright cabinet.
How many games can the kits support?
A supported daughter card can provide up to 8 games. Supported dual-side configurations can provide up to 16 total games depending on the PPU and Game Pak selections.
Why do I need to identify my PPU?
The available games and Game Pak configuration depend on the PPU installed on the original Nintendo VS PCB. Current supported references include 0001, 0002, 0003, 0004, and 2C03B.
Do I supply my own CPU and PPU?
Yes. The original CPU and PPU hardware is required for these kits. Expanded dual-side configurations require the appropriate CPU and PPU hardware for both sides.
Can I play head-to-head or 4-player games?
Yes, on compatible Red Tent / Dual Screen configurations with the correct Game Paks. Supported titles include Wrecking Crew, Balloon Fight, and Tennis depending on configuration.
Can I play Duck Hunt or Hogan's Alley?
Yes, with a compatible gun-game configuration. Hardware requirements vary by kit, and an NES Zapper requires the appropriate adapter.
How do I switch games on a Red Tent or Dual Upright?
On the documented right-side controls, hold Player 4 and move the joystick left or right to change games on that side.
How do I switch games on a Unisystem Upright?
Hold Player 2 and move the left-side joystick left or right to change supported games.
Are these Wi-Fi high-score-save kits?
The current Red Tent / Dual Upright and Unisystem product pages do not list Wi-Fi leaderboard or permanent high-score-save functionality.