Skip to main content Skip to search Skip to main navigation

vs Nintendo Unisystem Multigame Kit

Product information "vs Nintendo Unisystem Multigame Kit"

This is what you've been waiting for! The VS Unisystem Multigame kit! This is the newest Multi VS kit that has been upgraded with some cool new features!

Download Congo Bongo Install Guide (PDF)

Features -

  • Able to change games from your control panel - [Swap games by using Joystick [Joystick on left side of control panel] to the Left/Right while Button P2 is held down]
  • Coin up - by holding P1 + Button A
  • Change the side of your board - No need for any additional hardware to swap between Side A and Side B [Hold P1 button and move Joystick left [Side B] /right [Side A]
  • Use whatever gun you want - Original VS gun, HAPP 45 [No adapters needed] or a NES Zapper gun! [Zapper Adapter is needed]

Additional Information -

  • This kit comes with the Game Pak of your choice (based on your PPU). You can check out the games in each Game Pak below
  • The Nintendo VS Unisystem Multigame Kit is a Nintendo VS Multigame Kit compatible with games that use the EPROM sockets on the VS PCB
  • This Kit allows you to remove your eproms and play up to 8 different games! Dual Kits can play up to 16 games!
  • No other eproms are needed with the kit installed
  • You can select to get only one side or both sides, you will need 2 PPU and two CPU to run both sides
  • Plays all the games listed in the Game Pak for your PPU
  • This is for the upright VS UniSystem cabinet

Attention -

  • You will need to supply your own PPU and CPU for this kit to work
  • IMPORTANT - You will need 2 joysticks on the control panel and original gun will be plugged into kit [if applicable]
  • Gun games are only available on 2nd daughter card [optional purchase]
  • Depending on the PPU you have, this will determine your game list.
  • Some games like Tetris require the dip switches to be set to the correct color palette using the DIPS on your original PCB. That is how the original game works and they weren't changed on our custom roms.

How do I know what PPU I have?

Your PPU will USUALLY have a heat sink on it. I placed a photo in the gallery with an example of a PPU 0002 [signified by the "0002" in the middle] Yours can be an 0001, 0002, 0003, 0004 or a 2c03B.

Which side of the board is what?

I placed a photo in the gallery with an example

Game Paks -

PPU 0001 –

  • Standard – Mighty Bomb Jack, Pinball, Battle City, Excitebike, SMB, Skate Kid, Mach Rider, Tetris
  • With Gun – Mighty Bomb Jack, Battle City, Excitebike, SMB, Mach Rider, Tetris, Hogan’s Alley, Duck Hunt

PPU 0002 –

  • Standard – Mighty Bomb Jack, Excitebike, SMB, Slalom, Tetris, Battle City, Mach Rider, Golf
  • With Gun – Mighty Bomb Jack, Battle City, Excitebike, SMB, Slalom, Tetris, Hogan’s Alley, Duck Hunt

PPU 0003 –

  • Standard – Mighty Bomb Jack, Excitebike, SMB, Pinball, Tetris, Battle City, Skate Kid, Soccer
  • With Gun – Mighty Bomb Jack, Battle City, Excitebike, SMB, Soccer, Tetris, Hogan’s Alley, Duck Hunt

PPU 0004 –

  • Standard – Excitebike, SMB, Clu Clu Land, Tetris, Battle City, Skate Kid, Ice Climber, Pinball
  • With Gun – Clu Clu Land, Ice Climber, ExciteBike, SMB, Tetris, Mighty Bomb Jack, Hogan's Alley, Duck Hunt

PPU 2C03B –

  • Standard – Ninja Jajamaru Kun, Excitebike, SMB, Star Luster, Tetris, Battle City, Skate Kid, Mighty Bomb Jack
  • With Gun – Ninja Jajamaru Kun, Excitebike, SMB, Star Luster, Tetris, Mighty Bomb Jack, Hogan's Alley, Duck Hunt

FAQ

Which cabinet is this kit for?

This kit is designed specifically for the VS Unisystem upright cabinet.

How many games can I play?

The kit allows you to play up to 8 games. Dual kits can support up to 16 games.

Do I need to provide my own CPU and PPU?

Yes. You will need to supply your own CPU and PPU for the kit to function.

Can I play gun games?

Yes, gun games are supported. The original VS gun, HAPP 45, or a NES Zapper (with adapter) can be used.
Note: Gun games are only available on the optional second daughter card.

How do I swap between Side A and Side B?

Hold the P1 button and move the joystick left for Side B or right for Side A. No additional hardware is required.

Where can I download the installation guide?

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Cool Accessories

Any Coin Mech for Home Arcades
Any Coin Mech for Home Arcades

Any Coin Mech Designed as a direct drop-in replacement for coin mechanisms from Happ, Coinco, Imonex, and others. Features Drop-in replacement for existing arcade coin mechs. Accepts quarters, 0.984″ tokens, and dimes (no adjustments required). Engineered to reduce coin jams. Includes four plastic mounting pegs; will not rust. Made in the USA. For home arcade use. Compatibility Tested on arcade games from Atari, Bally/Midway, Gottlieb, Stern, Taito, Williams, Sega, and more.

Regular price: $7.50
Easy CoinUp
Easy CoinUp

Easy CoinUp (E.C.U.) — Quarter-Style Coin-Up Switch It Just Makes Sense! We’ve all seen it: a loose switch dangling from the coin door, or a hole drilled in the cabinet just to add credits. Many games offer a Free Play mode, but some disable attract sounds or visuals—so passers-by never see or hear the game in action. Easy CoinUp fixes that. It’s a pushbutton that looks like a quarter, so everyone knows exactly what it does: add a credit. Installation is simple and causes no permanent damage beyond applying adhesive to the metal coin door. Installation Instructions (Quick & Easy) Peel the backing liner and apply the E.C.U. where you want it mounted. Wrap the “tail” around the coin door, pressing firmly so the adhesive bonds (industrial 3M 300LSE—once it sticks, it sticks). Peel the second liner and apply the “Quarter” overlay to the front of the switch. Solder two wires from the tail’s solder pads to the machine’s coin switch. The E.C.U. is a membrane SPST switch; your machine must expect a single circuit closure (typical for most arcade and pinball machines). Insulate the E.C.U. pins with electrical tape after soldering so they can’t touch grounded metal or other circuits. Note: Installation requires basic soldering. Tips & Tricks Thoroughly clean the mounting area; finish with rubbing alcohol and let it evaporate. Mount near the “Insert Coin” slots so players find it quickly. Avoid high-friction spots on the coin door; look for rubbed paint or scratches and choose a smoother area. If the conductive circuit in the tail is worn through, the switch will stop working—route and secure it thoughtfully. Keep out of reach of children—they may peel or try to swallow the parts.

Regular price: $12.00
Skip product gallery

Spark your interest -

vs Nintendo Red Tent | vs Nintendo Dual Upright Multigame Kit
vs Nintendo Red Tent | vs Nintendo Dual Upright Multigame Kit
Add vs Zapper Adapter?: No. No adapter wanted Confirm Game Pak for Side A: Standard - PPU-2c03b Confirm Game Pak for Side B: Head to Head with Gun Pak - PPU-0003

VS Nintendo Red Tent | Dual Upright Multigame Kit The newest Multi VS kit—now upgraded with head-to-head play, 4-player support on compatible titles, on-panel game switching, and more. Key Features On-panel game switching — On the right side of control panel, hold P4 and move the joystick Left/Right to swap games on that side. Coin Up shortcut — Hold P4 for ~5 seconds to coin up. Head-to-Head play — Play VS titles facing off across both sides. 4-player support (title-dependent) — Play games like Wrecking Crew, Balloon Fight, and Tennis head-to-head on Red Tent or Dual Upright. NES Zapper support — Use a Zapper gun with the optional Zapper Adapter. Independent resets — Reset either side without interrupting the other. EPROM-socket compatible — Designed for VS PCBs that use EPROM sockets. Up to 16 total games — 8 games per side (depends on your PPU/Game Pak). Additional Information Your kit ships with a Game Pak for your specific PPU; see game lists below. You can remove original program EPROMs and play from the kit’s Game Pak selection. Tetris and Battle City require correct color palette DIP settings on the original PCB (matching original behavior). Important Compatible cabinets: VS Red Tent or VS Dual Screen Upright. Game list depends on your PPU (0001, 0002, 0003, 0004, or 2C03B). See the PPU Game Pak sections below. Identify your PPU: it usually has a heatsink; the part number (e.g., 0002) appears in the middle of the chip. Read the installation guide before setup — VS Red Tent / Dual Upright Multigame Installation Guide (PDF) . Game Paks by PPU PPU 0001 Standard: Mighty Bomb Jack, Pinball, Battle City, Excitebike, SMB, Skate Kid, Mach Rider, Tetris With Gun: Mighty Bomb Jack, Battle City, Excitebike, SMB, Mach Rider, Tetris, Hogan’s Alley, Duck Hunt With Gun | Special “Head-to-Head”: SMB, Excitebike, Tetris, Wrecking Crew, Balloon Fight, Tennis, Hogan’s Alley, Duck Hunt Special “Head-to-Head”: SMB, Excitebike, Tetris, Mighty Bomb Jack, Battle City, Wrecking Crew, Balloon Fight, Tennis PPU 0002 Standard: Mighty Bomb Jack, Excitebike, SMB, Slalom, Tetris, Battle City, Mach Rider, Golf (Single Sided) With Gun: Mighty Bomb Jack, Battle City, Excitebike, SMB, Slalom, Tetris, Hogan’s Alley, Duck Hunt With Gun | Special “Head-to-Head”: SMB, Excitebike, Tetris, Wrecking Crew, Balloon Fight, Tennis, Hogan’s Alley, Duck Hunt Special “Head-to-Head”: SMB, Excitebike, Tetris, Mighty Bomb Jack, Slalom, Wrecking Crew, Balloon Fight, Tennis PPU 0003 Standard: Mighty Bomb Jack, Excitebike, SMB, Pinball, Tetris, Battle City, Skate Kid, Soccer With Gun: Mighty Bomb Jack, Battle City, Excitebike, SMB, Soccer, Tetris, Hogan’s Alley, Duck Hunt With Gun | Special “Head-to-Head”: SMB, Excitebike, Tetris, Wrecking Crew, Balloon Fight, Tennis, Hogan’s Alley, Duck Hunt Special “Head-to-Head”: SMB, Excitebike, Tetris, Mighty Bomb Jack, Battle City, Wrecking Crew, Balloon Fight, Tennis PPU 0004 Standard: Excitebike, SMB, Clu Clu Land, Tetris, Battle City, Skate Kid, Ice Climber, Pinball With Gun: Clu Clu Land, Ice Climber, Excitebike, SMB, Tetris, Mighty Bomb Jack, Hogan’s Alley, Duck Hunt With Gun | Special “Head-to-Head”: Clu Clu Land, Ice Climber, Tetris, Wrecking Crew, Balloon Fight, Tennis, Hogan’s Alley, Duck Hunt Special “Head-to-Head”: SMB, Excitebike, Tetris, Clu Clu Land, Ice Climber, Wrecking Crew, Balloon Fight, Tennis PPU 2C03B Standard: Ninja Jajamaru Kun, Excitebike, SMB, Star Luster, Tetris, Battle City, Skate Kid, Mighty Bomb Jack With Gun: Ninja Jajamaru Kun, Excitebike, SMB, Star Luster, Tetris, Mighty Bomb Jack, Hogan’s Alley, Duck Hunt With Gun | Special “Head-to-Head”: Ninja Jajamaru Kun, Excitebike, SMB, Wrecking Crew, Balloon Fight, Tennis, Hogan’s Alley, Duck Hunt Special “Head-to-Head”: Ninja Jajamaru Kun, Excitebike, SMB, Tetris, Mighty Bomb Jack, Wrecking Crew, Balloon Fight, Tennis FAQ Which cabinets does this kit support? VS Red Tent and VS Dual Screen Upright only. What if I want to play Tennis, Balloon Fight or Wrecking Crew? You need to choose the “Head-to-Head” Game Paks for your PPUs. These titles support up to 4 players and must be selected to use both screens. How do I switch games? On the right side, hold P4 and move the joystick Left/Right to swap games on that side. How do I coin up quickly? Hold the P4 button for about 5 seconds. Does it support head-to-head and 4-player games? Yes. Titles such as Wrecking Crew, Balloon Fight, and Tennis support head-to-head on Red Tent/Dual Upright. 4-player depends on the game. Can I use a NES Zapper? Yes, with the optional Zapper Adapter. See Game Pak “With Gun” options for supported titles. Do the two sides reset independently? Yes. You can reset one side without interrupting the other player. Why do some games require DIP color palette changes? Tetris and Battle City follow the original PCB behavior and need correct palette DIPs set on the PCB. How do I know which PPU I have? The PPU usually has a heatsink. Look for a number printed on it (e.g., 0001, 0002, 0003, 0004, or 2C03B). How many games can I install? Up to 16 total—8 per side, depending on your PPU and chosen Game Pak. Where can I download the installation guide? Right here: VS Red Tent / Dual Upright Multigame Installation Guide (PDF) .

Regular price: $295.00
Qbert | Qbert Qubes | FHMC Qbert Multigame Free Play and High Score Save Kit

Average rating of 5 out of 5 stars

Qbert | Qbert Qubes | FHMC Qbert Multigame Free Play and High Score Save Kit
Would you like to add a 40pin Socket?: No

Customize Your QBert Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Multigame support for the Q*bert family, with menu or direct-boot options. Keep original gameplay while adding modern conveniences like Free Play, persistent high scores, attract sounds, and menu-driven DIP settings. Features Easy install: No soldering, board modifications, or special wiring—plug in and go. Boot options: Start at the Game Menu or boot directly into Qbert, Qubes, FHMC, Mello Yello, or 7-Eleven variants. Save your scores forever: Uses a serial EEPROM (not failure-prone NVRAM or batteries). High Score Save: Qbert saves Top 23; Qubes saves Top 20 (Supreme Nosers), or Top 20 (Supreme Nosers Elite if selected). Attract sounds: Enable at 25%, 50%, or 100% of attract-screen rotations. Free Play: Start games without coins—even in Qubes. Coin Up: Coins/tokens still supported; both coin slots behave the same in credit mode. Attract mode: Reduce screen burn—no more static screens. Menu-driven DIP settings: Change settings on-screen—no cabinet pull-out. ROM Saver: Optionally remove original program ROMs to save power. Cabinet support: Works in upright or cocktail cabinets (including Qbert Qubes). God Mode: Play indefinitely with unlimited lives (scores are not saved when enabled). Copyright: Set attract-screen branding to Highscoresaves.com or Gottlieb. Additional Features Backup & restore: Back up high scores and restore later—ideal before/after parties. Separate score tables: Different tables for 2, 3, 4, or 5 lives. Qbert Qubes upgrades: Cocktail mode added (not in original) and knocker is active. Level select & initials via joystick: Use joystick Up for level select and in the initials screen. 7-Eleven Qbert bonus: Unlocks unseen bonus-round graphics. Included Games Qbert Qbert Qubes FHMC Qbert (Faster, Harder, More Challenging) Mello Yello Qbert 7-11 Qbert Important Ensure your CPU is socketed before installing the kit. Read the installation guide (PDF) before installing. Just the FAQ's Do I need to solder anything? No, this kit is plug-and-play. No soldering or board modifications required. Does it save scores permanently? Yes, scores are stored in EEPROM and do not need batteries. How many high scores are saved? Qbert saves Top 23; Qubes saves Top 20 (or 20 Supreme Nosers Elite if enabled). Can I use Free Play and coins? Yes, the kit supports Free Play while also allowing Coin Up mode. Does it support attract sounds? Yes, attract sounds can be enabled at 25%, 50%, or 100% of attract rotations. What are the boot options? You can boot directly into a game or to the multigame menu. Does it support backup and restore? Yes, you can back up scores and restore them later—perfect for events. What is God Mode? God Mode allows unlimited lives for practice. Scores are not saved in this mode. Does it support cocktail cabinets? Yes, the kit supports both upright and cocktail cabinets, including Qbert Qubes cocktail. Where can I download the installation guide? You can download it here: Q*bert Multigame Installation Guide (PDF)

Regular price: $150.00
Tron | Satans Hollow Multigame Free Play and High Score Save Kit

Average rating of 5 out of 5 stars

Tron | Satans Hollow Multigame Free Play and High Score Save Kit
Make this WiFi Enabled to upload your scores?: YES! - Make this WiFi Enabled to upload my scores! +$35 Would you like an instruction magnet?: Yes, add an instruction magnet +$5 Would you like to add a z80?: Yes - Add a z80 +$7 Would you like to add a 40pin Socket?: Yes - Add a Socket +$1.50

Customize Your Tron Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. Features Easy install — No soldering, board modifications, or special wiring. Plug in and go on your Tron PCB. 8-digit scoring — Score up to 99,999,999 (no rollover at 999,999). Save your scores forever — Uses reliable serial EEPROM (not failure-prone NVRAM or batteries). High Score Save — Stores the Top 10 scores. Separate score tables — Independent high-score tables for each of the 4 game menus. Attract Sounds — Set to 25%, 50%, or 100% of the attract rotation. Freeplay — No more coins or opening the coin door. Coin Up — Still supports coins if desired. Attract Mode — Minimizes screen burn by avoiding static screens. On-screen DIP settings — Menu-driven; no cabinet pull-out to change physical dip switches. ROM Saver — Original program ROMs can be removed if desired. Cabinet support — Works in Upright and Cabaret cabinets. Additional Features Backup and Restore — Save and restore high scores (perfect before/after parties). Reset Button — Restart a game without powering off (enable in menu). ROM Revision — Satan’s Hollow and Tron use the latest revisions (Tron 8/09). Stealth Mode — Choose which game the kit boots to (last played or from list). Satan’s Hollow shield can be activated via Spinner, Up, Down, or Player 2 button (menu selectable). Important Ensure your Z80 CPU is socketed; if not, install a 40-pin socket for the kit to work. Read the Installation Guide (PDF) before you install. Just the FAQ's Is installation truly plug-and-play? Yes. No soldering or board mods are required. Ensure your Z80 is socketed. What’s the benefit of 8-digit scoring? Scores can reach 99,999,999 without rolling over at 999,999, preserving accurate high scores. Do Tron and Satan’s Hollow each keep separate scores? Yes. There are independent high-score tables for each of the 4 game menus. Can I use Freeplay but still accept coins? Absolutely. Freeplay is available, and coin inputs remain supported if you want them. Can I back up and restore high scores? Yes. Use Backup/Restore to save before events and restore afterward. Can I pick which game the kit boots into? Yes. Enable Stealth Mode to boot into your chosen game (last played or selected). Which cabinets are supported? Upright and Cabaret cabinets are supported. What processor is required? A socketed Z80 CPU is required for this multigame kit. Does the kit include the latest ROM revisions? Yes. Tron and Satan’s Hollow use the latest available revisions (Tron 8/09). Where can I download the installation guide? Right here: Tron & Satan’s Hollow Multigame Installation Guide (PDF) .

Variants from $175.00
Regular price: $223.50
Scramble | Super Cobra Multigame Free Play and High Score Save Kit
Scramble | Super Cobra Multigame Free Play and High Score Save Kit
Make this WiFi Enabled to upload your scores?: No, Standard Kit is good enough! Would you like an instruction magnet?: No, no instruction magnet for me Would you like to add a z80?: No Would you like to add a 40pin Socket?: Yes - Add a Socket +$1.50

Customize Your Scramble Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket—optional but recommended for easy installation. Learn More About This Kit Click a button to view details, tips, or the installation guide. This is the Scramble | Super Cobra Multigame Free Play and High Score Save Kit you have been waiting for! The multigame kit installs on an original Scramble arcade PCB. Features Easy install – No soldering, board modifications, or special wiring. Plug in and go! Save your scores forever – Uses a serial EPROM, not failure-prone NVRAM or batteries. High Score Save – Saves the Top 10 scores with initials. Choose your game – Scramble, Super Cobra, Anteater, Frogger, Amidar, Armored Car, Turtles, and The End. Attract Sounds – Adjustable at 25%, 50%, or 100%. Freeplay – No more coins or opening the coin door. Coin Up – Still supports coins if desired. Attract Mode – Minimize screen burn with dynamic screens. Change DIP settings – Menu-driven; no need to open the cabinet. ROM Saver – Optionally remove original program ROMs to save power. Cabinet Support – Works in Upright cabinets. Additional Features Backup and Restore – Save and restore high scores (perfect before/after parties). Separate score tables – Different tables for 2, 3, or 4 lives settings. Reset Button – Restart a game without powering off (requires enabling in menu). Self-Test – Accessible via the main menu or by setting all PCB DIP switches OFF. Continue? – Enable or disable at will. God Mode – Unlimited lives (scores won’t save). Stealth Mode – Make the kit look stock at boot up. Fixed Inputs – Upright-only; Player 1 inputs used (no rewiring needed). Important Ensure your Z80 is socketed. If not, install a 40-pin socket for kit compatibility. Read the Installation Guide (PDF) before installing. Scramble – Extended scoring up to 9,999,990 points. Choose difficulty between Konami and Stern (Stern ROMs drain fuel faster). Frogger – Extended scoring up to 9,999,990 points; music bug fixed with improved tune. Known Differences – The End: bullets are dots; Frogger: blue street instead of black; Anteater: blue tunnels. Game List Scramble Super Cobra Anteater Frogger Amidar Armoured Car Turtles The End FAQ Do I need to solder anything? No, this kit is plug-and-play. No soldering or board modifications required. Does it save high scores permanently? Yes, high scores are stored in serial EPROM and don’t require batteries. How many scores are saved? The kit saves the Top 10 scores with initials for each game. Can I switch between games? Yes, you can choose Scramble, Super Cobra, Anteater, Frogger, Amidar, Armored Car, Turtles, or The End from the menu. Does it support attract sounds? Yes, attract sounds are adjustable at 25%, 50%, or 100% of attract mode. Can I enable Freeplay? Yes, Freeplay mode is supported. Coin Up is still available if desired. Does it support backup and restore? Yes, scores can be backed up and restored—ideal for parties or competitions. What special modes are included? The kit includes God Mode, Stealth Mode, and Continue options for extended play and flexibility. What are the known differences? The End: bullets are dots; Frogger: blue street instead of black; Anteater: blue tunnels. Where can I download the installation guide? You can download it here: Scramble Multigame Installation Guide (PDF)

Variants from $150.00
Regular price: $151.50
Jungle Hunt | Elevator Action | Taito Multigame Free Play and High Score Save Kit

Average rating of 5 out of 5 stars

Jungle Hunt | Elevator Action | Taito Multigame Free Play and High Score Save Kit
Make this WiFi Enabled to upload your scores?: No, Standard Kit is good enough! Would you like an instruction magnet?: Yes, add an instruction magnet +$5 Would you like to add a z80?: No Would you like to add a 40pin Socket?: Yes - Add a Socket +$1.50

Customize Your Jungle Hunt | Elevator Action | Taito Multigame Free Play and High Score Save Kit Build your kit exactly how you want it. Choose a Wi-Fi Enabled Kit or a Standard Save Kit. You can also add a processor and/or a 40-pin socket — optional but recommended for easy installation. Learn More About This Kit Click a button to view details, setup tips, or the full installation guide. This is the Jungle Hunt | Elevator Action | Taito Multigame Free Play and High Score Save Kit you’ve been waiting for! Compatible with original Elevator Action or Jungle Hunt [SJ Taito PCB] arcade boards. Key Features Easy installation — No soldering, board modifications, or special wiring. Plug in and play. Permanent high score saving — Uses a serial EPROM, not failure-prone NVRAM or batteries. High Score Save — Stores the Top 5 scores with initials. Game selection — Choose from Elevator Action, Jungle King, Jungle Hunt, Pirate Pete, Time Tunnel, Space Seeker, and Seafighter Poseidon. Attract sounds — Adjustable at 25%, 50%, or 100%. Freeplay mode — No coins required, but still supports coin-up if desired. Attract mode screen saver — Reduces monitor burn-in. Menu-driven DIP switch settings — No need to pull out your board. ROM saver — Remove original program ROMs to reduce power use. Cabinet support — Fully compatible with Upright cabinets. Additional Features Backup & restore high scores — Perfect before and after parties. Separate score tables — Different tables for 2, 3, or 4 lives. Reset button option — Restart a game without powering down. Accessible self-test — From the main menu or by setting DIP switches off. Continue feature — Enable or disable as desired. God Mode — Unlimited lives (scores not saved). Stealth Mode — Boots up to look stock. Important Notes Ensure your Z80 is socketed; if not, install a 40-pin socket. Read the Jungle Hunt | Elevator Action | Taito Multigame Installation Guide (PDF) carefully before setup. Compatible with Jungle Hunt and Elevator Action PCBs. Game List Elevator Action Jungle King Jungle Hunt Pirate Pete Time Tunnel Space Seeker Seafighter Poseidon Just the FAQ's Which games are included? This multigame kit includes Elevator Action, Jungle King, Jungle Hunt, Pirate Pete, Time Tunnel, Space Seeker, and Seafighter Poseidon. How many scores are saved per game? Each title maintains its own table with the Top 5 high scores and initials. Does it support Freeplay and coin-up? Yes. You can enable Freeplay or keep coin-up active, depending on your setup. Can I change DIP settings without opening the cabinet? Yes. DIP options are fully menu-driven and accessible on-screen. What is the ROM Saver feature? ROM Saver allows you to remove the original program ROMs; the program runs on the save kit to reduce power and heat. Is my PCB compatible? This kit is designed for original SJ Taito PCBs, specifically Jungle Hunt and Elevator Action boards. How do attract sounds work? You can set attract sounds to play at 25%, 50%, or 100% of the attract cycle. Does the kit have a Continue feature or God Mode? Yes. A Continue option can be enabled/disabled, and God Mode provides unlimited lives (scores are not saved while enabled). How do I run self-test or restart without power cycling? Self-test is accessible via the main menu or by setting PCB DIP switches off. A reset option lets you restart without powering down. Where can I download the Installation Guide? Grab it here: Jungle Hunt | Elevator Action | Taito Multigame Installation Guide (PDF).

Variants from $150.00
Regular price: $156.50