Targ | Spectar | Side Trak Multigame Kit for Original Exidy Hardware
Upgrade documented compatible original Targ or Spectar arcade PCBs with the Targ | Spectar | Side Trak Multigame Free Play and High Score Save Kit, adding three supported games, Free Play, permanent Top 5 score saving with initials, menu-driven settings, serial EEPROM storage, ROM Saver support, Fast Boot, Stealth Mode, and optional Wi-Fi leaderboard support.
This is an original-hardware arcade PCB upgrade, not an emulation platform, reproduction board, or generic multicade replacement. The kit keeps the original Exidy-style arcade hardware in service while adding multigame selection, reliable score saving, and operator-friendly configuration features.
Targ Three-Game Multigame Upgrade
A focused upgrade for compatible original Targ or Spectar PCBs that adds Targ, Spectar, and Side Trak with score saving, Free Play, attract-sound control, game selection, and optional online leaderboard support.
- Designed for documented compatible original Targ or Spectar arcade PCBs
- Includes Targ, Spectar, and Side Trak
- Permanent Top 5 high score saving with initials
- Separate score tables for two, three, four, and five lives
- Free Play with traditional Coin-Up operation available
- Serial EEPROM score storage with no batteries required
- Attract sounds adjustable at 25%, 50%, or 100%
- Menu-driven DIP switch settings
- ROM Saver support for optional original program ROM removal
- Backup and Restore support for saved scores
- Reset Button, Fast Boot, and Stealth Mode support
- Works in upright or cocktail cabinet configurations
- Optional 2.4 GHz Wi-Fi leaderboard support
Game Selection and Settings Menu Access
Use the kit menu to switch between Targ, Spectar, and Side Trak and to manage supported game settings.
To access supported HighScoreSaves settings, hold Player 1 Start while turning the cabinet on. Release the button when the on-screen prompt tells you to continue.
Verify Targ or Spectar PCB Compatibility Before Ordering
- This kit is designed for documented compatible original Targ or Spectar arcade PCBs.
- A 6502 processor is required for installation.
- The original 6502 is removed, installed on the HighScoreSaves daughter card, and the kit is installed where the 6502 was located.
- No soldering is required when the 6502 location already has a compatible 40-pin socket.
- If the processor is soldered directly to the PCB, a compatible 40-pin socket must be installed before using the kit.
- Review the installation guide before setup and verify processor orientation, socket condition, board compatibility, and all installation steps before restoring cabinet power.
Read more below
Targ Multigame Kit Details and Benefits
The Targ | Spectar | Side Trak Multigame Free Play and High Score Save Kit upgrades documented compatible original Targ or Spectar arcade hardware with three supported games, Free Play, permanent Top 5 score saving with initials, menu-driven settings, serial EEPROM storage, attract-sound options, ROM Saver support, Backup and Restore, Reset Button, Fast Boot, Stealth Mode, and optional Wi-Fi leaderboard support.
This is an original-hardware upgrade for collectors, restorers, and operators who want Targ multigame support without replacing the original arcade PCB with an emulator, reproduction board, or generic multicade system.
Main Targ Multigame Features
- Three games included: Play Targ, Spectar, and Side Trak.
- Original hardware support: Designed for documented compatible original Targ or Spectar arcade PCBs.
- Permanent score saving: Saves the Top 5 scores with initials.
- Separate score tables: Supports different score tables for two-, three-, four-, and five-life settings.
- Serial EEPROM storage: Saves supported scores and settings without batteries or failure-prone NVRAM.
- Free Play: Start supported games without inserting coins.
- Coin-Up support: Continue using traditional quarters or tokens when desired.
- Attract sounds: Set supported attract sounds at 25%, 50%, or 100%.
- Menu-driven DIP settings: Configure supported settings directly from the on-screen menu.
- ROM Saver support: Original program ROMs may be removed to reduce heat and power usage.
- Backup and Restore: Save and restore supported high-score data before testing, service, or events.
- Reset Button support: Restart gameplay without powering off when enabled.
- Fast Boot: Helps avoid long initialization delays.
- Stealth Mode: Boot directly into gameplay for a more stock arcade appearance.
- Cabinet compatibility: Supports upright and cocktail cabinet configurations.
- Optional Wi-Fi: Add supported online score submission while retaining local score saving.
Game Selection and Settings Menu Access
The Targ multigame kit supports game selection between Targ, Spectar, and Side Trak through the supported menu system.
To access supported HighScoreSaves settings, hold Player 1 Start while turning the cabinet on. Release the button when the on-screen prompt tells you to continue.
Included Games and Score Saving
The Targ multigame kit includes Targ, Spectar, and Side Trak. Each supported game can use saved score data while keeping the original arcade PCB platform as the core hardware.
The kit saves the Top 5 supported scores with initials. Separate score tables are supported for two-, three-, four-, and five-life settings, allowing the cabinet owner to preserve score data across supported configuration choices.
Scores and settings are stored through serial EEPROM instead of batteries or NVRAM. Backup and Restore support is included for managing score data during maintenance, testing, transport, or events.
Free Play, Coin-Up, Attract Sounds, and ROM Saver
Free Play allows supported games to start without inserting coins. Traditional Coin-Up operation can still be used when desired, making the kit useful for home arcades, collector cabinets, routed locations, and events.
Attract sounds can be configured at 25%, 50%, or 100%. Attract mode helps reduce static-screen burn and keeps the cabinet presentation active during idle time.
ROM Saver support allows documented original program ROM removal so the game program can run from the upgrade kit. This can reduce heat and power use on aging original hardware when installed according to the guide.
Installation and PCB Requirements
- Designed for documented compatible original Targ or Spectar arcade PCBs.
- A 6502 processor is required for installation.
- The kit includes a 6502 daughter card.
- The original 6502 is removed from the PCB, installed on the daughter card, and the daughter card is installed where the 6502 was located.
- No soldering is required when the 6502 location already has a compatible 40-pin socket.
- If the 6502 is soldered directly to the PCB, a compatible 40-pin socket must be installed before using the kit.
- Verify the notch and Pin 1 orientation on the 6502 before restoring power.
- Review the installation guide, double-check all work, and power off immediately if the game does not start after installation.
Standard and Optional Wi-Fi Versions
Standard kits save supported scores and settings locally. An internet connection is not required for gameplay, Free Play, Coin-Up operation, menu access, or local score saving.
Optional 2.4 GHz Wi-Fi kits include the same local features and add supported online score submission through the HighScoreSaves leaderboard platform.
Wi-Fi can be disabled without affecting local gameplay, Free Play, Coin-Up operation, score saving, game selection, or menu operation.
Targ Multigame Kit FAQ
Which games are included?
The kit includes Targ, Spectar, and Side Trak.
Which PCB is required?
This kit is designed for documented compatible original Targ or Spectar arcade PCBs.
How many scores are saved?
The kit saves the Top 5 scores with initials.
Does it support Free Play and Coin-Up?
Yes. Free Play and traditional Coin-Up operation are supported.
Does it support attract sounds?
Yes. Attract sounds can be enabled at 25%, 50%, or 100% rotation intervals.
What processor is required?
A socketed 6502 processor is required.
Can I back up and restore scores?
Yes. Backup and Restore functionality is built directly into the kit.
What is Stealth Mode?
Stealth Mode boots directly into gameplay while bypassing menus for a more stock arcade appearance.
Is Wi-Fi required?
No. Standard kits save supported scores locally. Wi-Fi is optional for online leaderboard support.