Star Wars | Empire Strikes Back Multigame Free Play and High Score Save Kit
$225.00
Product information "Star Wars | Empire Strikes Back Multigame Free Play and High Score Save Kit"
Star Wars | Empire Strikes Back Multigame Free Play and High Score Save Kit
Features
- Easy install — No soldering, board modifications, or special wiring. Plug in and go!
- Star Wars PCB — Installs on an original Atari Star Wars PCB to play both games.
- Save your scores forever — Saves scores without batteries.
- High Score Save — Saves the Top 8 scores.
- Freeplay — No more coins or opening the coin door.
- Coin Up — Still supports coins if wanted.
- Attract Sounds — Hear the infamous music!
- Support — Can be used in Upright or Cockpit cabinets.
Changing games: Hold the LEFT THUMB button for 2 seconds and release. Then hold the RIGHT THUMB button for 2 seconds and release.
Game List
- Star Wars
- Empire Strikes Back
Important
- Requires an original Atari Star Wars PCB for installation.
- Read the Star Wars | Empire Strikes Back Installation Guide (PDF) before installing.
FAQ
Which PCB is required?
This kit installs on an original Atari Star Wars PCB.
Which games are included?
This multigame kit supports Star Wars and Empire Strikes Back.
How do I switch between games?
Hold the LEFT THUMB button for 2 seconds and release, then hold the RIGHT THUMB button for 2 seconds and release.
Does it save high scores?
Yes, it saves the Top 8 high scores permanently (no batteries required).
Does it support Freeplay?
Yes, Freeplay is supported. You can also still use coin-up if desired.
Where can I download the Installation Guide?
Download it here: Star Wars | Empire Strikes Back Multigame Installation Guide (PDF)
Login
Level up with these!
Star Wars | Empire Strikes Back Multigame Instruction Magnet This magnet applies and removes easily. It adheres to any ferrous metal (steel control panels, coin doors, etc.). For non-metal surfaces, use double-sided mounting tape (not included). Specifications Size: 3″ (L) × 2″ (W) Finish: Soft-laminated top Back: Strong magnetic backing
6100 Deflection Board LV Section Replacement Module The 6100 Deflection Board LV Section Replacement Module is designed to replace the unreliable low-voltage (LV) section found on the Atari 6100 vector monitor deflection board. This upgrade eliminates several common failure points that can cause instability, monitor shutdown, or inconsistent operation. Over time, the original low-voltage circuitry on the 6100 deflection board can become unreliable due to aging components, heat stress, and repeated power cycling. This replacement module modernizes that section of the circuit and provides improved reliability while maintaining proper monitor operation. Once installed, the module restores stable low-voltage regulation for the deflection board, helping ensure your vector monitor operates correctly in classic arcade machines such as Tempest, Star Wars, Major Havoc, Quantum, and other Atari vector cabinets that use the 6100 monitor. Key Features Replaces the original low-voltage section of the Atari 6100 deflection board Eliminates common LV circuit failure points Improves long-term reliability of the vector monitor Helps stabilize monitor operation and voltage regulation Designed for arcade restoration and repair work Compatibility Designed for use with the Atari 6100 vector monitor commonly found in classic arcade machines such as Tempest, Star Wars, Major Havoc, Quantum, and other Atari vector titles. Installation Notes Soldering and de-soldering are required for installation. The module installs directly onto the 6100 deflection board as shown in the gallery images. Installation should be performed by someone experienced with arcade PCB repair. This upgrade is an excellent solution for arcade collectors and technicians restoring original Atari vector monitors who want improved reliability without replacing the entire deflection board.
Atari AVG Custom Chip Replacement The Atari AVG Custom Chip Replacement is designed as a direct substitute for the original Atari AVG chip (Part Number: 137179-001). This custom component functions as the Gate Array / Address Controller used in Atari vector arcade hardware, handling critical addressing and control tasks required for proper system operation. Because the original Atari AVG chip is long discontinued and increasingly difficult to source, this replacement solution provides a reliable option for repairing and restoring classic Atari arcade boards. It is engineered to replicate the functionality of the original DIP package chip while allowing collectors and technicians to keep their vector-based arcade systems running. This chip is commonly used in Atari vector arcade machines where the AVG (Analog Vector Generator) system manages the generation and control of vector graphics displayed on the monitor. Proper operation of this chip is essential for stable gameplay and correct vector drawing. Key Features Replacement for Atari AVG custom chip Compatible with original part number 137179-001 Implements the Gate Array / Address Controller function Designed for repair and restoration of Atari vector arcade boards Helps maintain long-term operation of classic Atari vector systems
MB14241 Reproduction Data Shifter (Space Invaders / Deluxe Replacement) Bring your classic Midway Taito hardware back to life with this MB14241 Reproduction Data Shifter. This new-manufacture IC is a drop-in, pin-compatible replacement for the original MB14241 custom chip found on Space Invaders and Space Invaders Deluxe arcade PCBs. If your game is showing scrambled, misaligned, or missing graphics, the data shifter is often the culprit—this reproduction restores proper video output. Key Features Direct replacement for the MB14241 data shifter IC used in Taito/Midway Space Invaders boards. 28-pin DIP footprint for easy socketed installation. 100% new components — no recycled pulls. Batch tested for reliable timing and stable video performance. Packaged in anti-static protective wrap for safe handling. Typical Compatibility Space Invaders (Midway/Taito original) Space Invaders Deluxe Other hardware revisions and licensed boards that call out MB14241 in the parts list Always confirm your PCB revision before ordering — some bootlegs and conversions may use alternate ICs. Installation Notes Verify if you need to install a socket for this product.Power down and discharge your cabinet before handling the PCB. Use proper ESD precautions; install into a quality 28-pin socket. Align the orientation notch with the board silkscreen to avoid damage. If video issues persist, check related RAMs/ROMs and edge connector signals. Why Replace the MB14241? After decades of operation, the original MB14241 chips frequently fail, causing garbled aliens, misplaced rows, or blank areas on screen. This reproduction restores clean and correct shifting of video data, ensuring your Space Invaders plays and looks the way it did in 1978. What’s Included 1× MB14241 Reproduction Data Shifter Protective anti-static packaging Space Invaders is a trademark of Midway | Taito Corporation. This is a third-party reproduction component intended for use as a service replacement on original arcade hardware.
19-Inch Amplifone Arcade Monitor Bracket Set – Reproduction The 19-Inch Amplifone Monitor Bracket Set is a precision reproduction designed for arcade cabinet restorations. These brackets provide strong support and accurate alignment for Amplifone vector monitor assemblies, helping ensure reliable performance in your classic arcade machine. Ideal for collectors, restorers, and arcade enthusiasts seeking authentic fit and function. Key Features Reproduction of the original 19-inch Amplifone monitor brackets Precision-cut construction for proper fit and long-term stability Durable materials for dependable, long-lasting use Compatible with titles such as Star Wars, Major Havoc, and other vector cabinets using Amplifone monitors Includes complete left and right bracket set for straightforward installation Why This Bracket Set? Using the correct bracket system secures your Amplifone monitor safely while protecting cabinet integrity and delivering authentic arcade performance. Whether restoring a classic machine or replacing worn hardware, this bracket set provides the strength and accuracy required for reliable installation. Compatibility Designed specifically for 19-inch Amplifone vector monitor assemblies commonly found in arcade machines such as Star Wars (Atari), Major Havoc, and other cabinets originally shipped with Amplifone vector monitors. Included in the Set One pair of monitor brackets (left and right) Factory-spec mounting holes for accurate installation
LETA Replacement Chip for Atari Arcade Boards Modern replacement for the original Atari LETA custom chip used in classic arcade machines. The LETA Replacement Chip is designed to replace a failed or aging LETA chip found on certain Atari arcade PCBs. This updated version uses modern surface-mount components to improve reliability while maintaining full compatibility with the original hardware. Original LETA chips can fail over time due to age, heat, or electrical stress. When the chip fails, games that rely on it may exhibit control issues, boot problems, or improper input behavior. This replacement solution restores proper functionality while providing long-term reliability for arcade restoration and repair projects. Key Features Direct replacement for the original Atari LETA custom chip Uses modern surface-mount components for improved reliability Designed for long-term operation in classic arcade hardware Helps restore proper functionality to affected arcade PCBs Ideal for arcade technicians and restoration projects Compatibility Major Havoc (Atari) Other Atari arcade boards that utilize the LETA chip Installation Notes Remove the original LETA chip from the PCB Install the replacement chip in the correct orientation Ensure the board is powered off during installation Recommended for technicians familiar with arcade PCB repair Product Specifications Product Type: Arcade PCB Replacement Chip Replacement For: Atari LETA Custom Chip Technology: Modern surface-mount components Application: Atari arcade PCB repair and restoration Installation: Direct replacement for original chip This LETA replacement chip provides a dependable solution for repairing classic Atari arcade boards and helps keep vintage arcade machines running reliably for years to come.
40-Pin Socket Specifications This 40-pin DIP socket is designed for reliable installation of integrated circuits and arcade daughter boards that use a standard 40-pin layout. Using a socket allows the chip or module to be easily removed or replaced without soldering directly to the PCB, helping protect the board during upgrades, repairs, or troubleshooting. Pin Pitch: 2.54 mm (0.100″) standard DIP spacing Total Pins: 40 pins arranged in two rows (2×20) Mounting Type: Through-hole (THT) for secure soldered installation Compatibility: Designed for standard 40-pin DIP integrated circuits and modules Installation Benefit: Allows ICs to be inserted or removed without repeated soldering Use Case: Ideal for arcade PCB upgrades, ROM installations, and repair work The standard 2.54 mm (0.100″) pin spacing matches the layout used on most classic arcade PCBs and DIP integrated circuits. Once soldered to the board, the socket provides a stable connection while allowing the chip to be safely inserted and removed when needed.
Spark your interest -
Donkey Kong Rearranged 3DK and 3DKJr Multigame Free Play and High Score Save Kit Expand a compatible original Nintendo Donkey Kong or Donkey Kong Jr. two-board arcade PCB with multiple classic games, Rearranged gameplay, practice levels, Free Play, permanent score saving, menu-driven settings, and optional Wi-Fi leaderboard support. Select the 3DK configuration for installation on a compatible Donkey Kong PCB or the 3DKJr configuration for installation on a compatible Donkey Kong Jr. PCB. Both configurations provide the same expanded Donkey Kong game collection. Included Game Content: Donkey Kong • Pauline Donkey Kong • Donkey Kong Jr. • Donkey Kong 3 • D2K: Jumpman Returns • Pauline D2K: Jumpman Returns • Japanese Game Revisions • Practice Levels • Donkey Kong Rearranged Original Nintendo Two-Board Hardware • No Emulation • Original Games and Expanded Modes • Included Z80 Processor 3DK Guide — Donkey Kong PCB 3DKJr Guide — Donkey Kong Jr. PCB Compare All Donkey Kong Jr. Kit Options Expanded Multigame Play classic, Pauline, D2K, Japanese, practice, and Rearranged Donkey Kong game variations. Modern Game Menu Hold Player 1 Start during attract mode to open the game-selection menu. Scores and Initials Permanently saves the Top 5 scores and player initials for supported games. Optional Wi-Fi Submit qualifying scores to the HighScoreSaves online leaderboard. Choose the Correct 3DK or 3DKJr Configuration This is one shared Donkey Kong Rearranged multigame product with two installation configurations. Select the configuration that matches the original Nintendo arcade PCB in your cabinet. 3DK Configuration Installs on a compatible original Donkey Kong two-board PCB Uses the 3DK Donkey Kong PCB installation guide Does not install on original four-board Donkey Kong hardware 3DKJr Configuration Installs on a compatible original Donkey Kong Jr. two-board PCB Uses the dedicated 3DKJr Donkey Kong Jr. PCB installation guide Does not install on a standalone Donkey Kong 3 PCB The configuration refers to the original arcade PCB used for installation. It does not limit which supported games are available through the multigame menu. Included Games and Modes Included Classic and Expanded Games Donkey Kong Pauline Donkey Kong Donkey Kong Jr. Donkey Kong 3 D2K: Jumpman Returns Pauline D2K: Jumpman Returns Supported Japanese game revisions Practice levels Donkey Kong Rearranged Optional Four-Game Remix Collection Select the optional Remix Collection during purchase to add: Donkey Kong Remix Donkey Kong Jr. Remix Donkey Kong Christmas Remix Donkey Kong Spooky Remix Rearranged Unlockable Editions Rearranged contains hidden unlockable modes including Drunken Master, Black Hammer, Wild Barrel, Miner 2049er, Builders, FHMC, and Personal editions. Donkey Kong Rearranged Multigame Features Modern Game Menu: Hold Player 1 Start for approximately four seconds during attract mode to open the supported game-selection menu. Permanent High Score Saving: Battery-free storage retains the Top 5 scores and player initials for supported games after cabinet power is turned off. Extended Scoring: Supports scores above one million points in supported games. Free Play: Start games without inserting coins while retaining supported coin and token operation. Adjustable Attract Sounds: Select attract sounds during 25%, 50%, or 100% of supported attract-mode rotations. Menu-Driven Settings: Adjust supported game and DIP-switch options through the kit menu. Attract-Screen Protection: Reduces prolonged display of supported static attract screens while the cabinet is idle. ROM Saver: Supports removal of designated original program ROMs as documented in the correct installation guide. Practice Levels: Practice specific supported gameplay sections and levels. Sound Expansion Support: Provides the additional audio support required by compatible multigame content. Kill-Screen Setting: Enable or disable supported kill-screen behavior. Rearranged Edition: Combines and intertwines stage layouts into a mixed progression separate from the original game modes. Unlockable Modes: Discover hidden gameplay editions and challenge variations within Rearranged. Hardware Compatibility Compatible Installation PCBs: Compatible original Nintendo Donkey Kong or Donkey Kong Jr. two-board PCB stacks Configuration Selection: Select Donkey Kong PCB or Donkey Kong Jr. PCB during purchase Included Processor: The main Rearranged daughterboard includes its Z80 processor CPU Socket Requirement: The installation location must have a compatible 40-pin CPU socket Four-Board Donkey Kong Hardware: Not supported Standalone Donkey Kong 3 PCB: Not supported as an installation platform Original Donkey Kong 3 Game: Included as playable multigame content even though the kit does not install on a Donkey Kong 3 PCB Cabinet Access: Access to both boards in the original two-board stack is required during installation Important Installation Notes Two-Board Stack Required: This product does not support original four-board Donkey Kong hardware. Socketed CPU Location Required: The 40-pin CPU installation location must have a compatible socket. Processor Included: The Rearranged main daughterboard includes its Z80 processor. Soldering: No soldering is required when all required installation locations are already socketed. If a Required Location Is Soldered: A qualified arcade technician must install the appropriate socket before the kit can be used. Correct Guide Required: Use the 3DK guide for a Donkey Kong PCB and the 3DKJr guide for a Donkey Kong Jr. PCB. Standard and Optional Wi-Fi Kits Compare Standard and Wi-Fi Enabled Kits The Standard Kit permanently saves supported scores, initials, and settings locally. It does not require an internet connection. The optional Wi-Fi Enabled Kit includes the same local score-saving features and can also submit qualifying scores to the HighScoreSaves online leaderboard. Wi-Fi-enabled kits connect to compatible 2.4 GHz Wi-Fi networks. Wi-Fi can be disabled without affecting local score saving or gameplay. View Global Arcade High Scores Donkey Kong Rearranged 3DK and 3DKJr FAQ What is the difference between 3DK and 3DKJr? The game collection is the same. The difference is the original Nintendo PCB used for installation. Select 3DK for a compatible Donkey Kong two-board PCB or 3DKJr for a compatible Donkey Kong Jr. two-board PCB. Is this the same product as the Donkey Kong Jr. Remix Trainer kit? No. This is the broader Donkey Kong Rearranged multigame system. The John Kowalski Donkey Kong Jr. Remix Multigame with Trainer is a separate product focused on Donkey Kong Jr. Remix and training tools. Does the kit install on both Donkey Kong and Donkey Kong Jr. PCBs? Yes, when the correct configuration is selected. Both installation platforms must be compatible original Nintendo two-board PCB stacks. Does it support an original four-board Donkey Kong PCB stack? No. The product supports compatible original two-board Donkey Kong and Donkey Kong Jr. PCB stacks only. Does the kit install on a Donkey Kong 3 PCB? No. Donkey Kong 3 is included as playable multigame content, but a standalone Donkey Kong 3 PCB cannot be used as the installation platform. Is a processor included? Yes. The main Rearranged daughterboard includes its Z80 processor. How many scores are saved? The kit saves the Top 5 scores and player initials for supported games. How is the game-selection menu opened? Hold Player 1 Start for approximately four seconds during attract mode to open the supported game-selection menu. What is Donkey Kong Rearranged? Rearranged combines and intertwines stage layouts into a mixed gameplay progression with hidden challenge editions. What does the optional Remix Collection add? It adds Donkey Kong Remix, Donkey Kong Jr. Remix, Donkey Kong Christmas Remix, and Donkey Kong Spooky Remix. Which installation guide should I use? Use the guide matching the original arcade PCB selected during purchase: 3DK Guide for Donkey Kong PCB 3DKJr Guide for Donkey Kong Jr. PCB Designed, tested, and supported by HighScoreSaves for compatible original Nintendo Donkey Kong and Donkey Kong Jr. two-board arcade hardware. Donkey Kong Rearranged Resources and Guides 1. 3DK Installation Guide — Donkey Kong PCB 2. 3DKJr Installation Guide — Donkey Kong Jr. PCB 3. HighScoreSaves Tips and Tricks 4. Compare All Donkey Kong Jr. Kit Options 5. Donkey Kong Rearranged Video Overview 6. Standard and Wi-Fi Kit Comparison 7. HighScoreSaves YouTube Channel
Elevator Action Multigame Free Play and High Score Save Kit for Taito SJ Hardware Upgrade a documented compatible original Taito SJ Elevator Action or Jungle Hunt arcade PCB with a 7-game multigame upgrade, Free Play, Top 5 score saving with initials, serial EEPROM storage, menu-driven settings, ROM Saver support, and optional Wi-Fi leaderboard support. The HighScoreSaves Elevator Action Multigame Kit works with original Taito SJ arcade hardware rather than replacing the game board with an emulation platform, reproduction PCB, or multicade system. Games Included: Elevator Action • Jungle King • Jungle Hunt • Pirate Pete • Time Tunnel • Space Seeker • Seafighter Poseidon Original Arcade Hardware • No Emulation • No Gameplay Changes • Designed for Authentic Arcade PCBs View/Download Elevator Action Multigame Install Guide (PDF) 7 Games Included Select from supported Taito SJ arcade titles through the kit menu. Permanent High Scores Stores Top 5 scores with initials for each supported game. Menu-Driven Settings Configure supported DIP and gameplay options on-screen. Optional Wi-Fi Add online leaderboard score submission while keeping local saving. Upgrade Your Taito SJ Arcade PCB The HighScoreSaves Elevator Action Multigame Free Play and High Score Save Kit adds modern operator conveniences to documented compatible original Jungle Hunt and Elevator Action Taito SJ arcade PCBs while preserving original arcade hardware behavior. This multigame upgrade adds Free Play, score saving, attract sounds, menu-driven settings, ROM Saver support, backup and restore functions, reset options, continue options, Stealth Mode, and optional Wi-Fi leaderboard support. Hardware Compatibility Original hardware: Designed for documented compatible original Taito SJ arcade PCBs PCB compatibility: Works with original Jungle Hunt and Elevator Action SJ Taito PCBs Processor requirement: Requires a compatible socketed Z80 processor location Cabinet compatibility: Designed for upright cabinets Installation: A compatible 40-pin socket is required if the Z80 is soldered directly to the PCB Kit Options Choose a Standard Save Kit for local score saving or a Wi-Fi Enabled Kit for local score saving plus online leaderboard support. Optional processor and 40-pin socket options are available to help simplify installation on original Taito SJ hardware. Main Features 7-game multigame support: Elevator Action, Jungle King, Jungle Hunt, Pirate Pete, Time Tunnel, Space Seeker, and Seafighter Poseidon Permanent high score saving: Stores Top 5 scores with initials for each supported game Battery-free storage: Uses serial EEPROM storage instead of batteries or failure-prone NVRAM Free Play: Start supported games without inserting coins Traditional Coin-Up operation: Continue accepting quarters or tokens when Free Play is disabled Attract sounds: Adjustable at 25%, 50%, or 100% attract rotation Attract mode screen saver: Helps reduce monitor burn-in during idle operation Menu-driven DIP settings: Configure supported settings through the on-screen menu ROM Saver: Original program ROMs may be removed when using supported ROM Saver features High Scores button: Quickly access score tables for the selected game All Global High Scores button: Useful for Wi-Fi enabled leaderboard viewing Backup and restore: Save and restore supported score data before and after events, parties, or tournaments Separate score tables: Supports separate score tables for 2, 3, and 4 lives settings Reset button option: Restart gameplay without powering off the cabinet when the reset option is enabled Accessible self-test: Launch supported self-test from the menu or DIP switches Continue feature: Enable or disable continues God Mode: Unlimited lives mode with score saving disabled Stealth Mode: Boots and behaves more like a stock original PCB Optional Wi-Fi: Add online leaderboard score submission while keeping local score saving Game Selection and Settings Menu Access To access the multigame selection menu, hold Player 1 Start for about four seconds during attract mode. Use the menu to select the supported Taito SJ game you want to play. To access the HighScoreSaves settings menu, hold Player 1 Start while turning the cabinet on. Release the button when the on-screen prompt tells you to continue. Holding Player 1 Start + Player 2 Start while turning the cabinet on resets supported settings data to factory defaults. During gameplay, Player 1 Start + Player 2 Start can be used as a soft restart only when the reset/menu reset option is enabled. Important Installation Notes Socketed Z80 required: Install a compatible 40-pin socket if the Z80 is soldered directly to the PCB. PCB compatibility: Designed for documented compatible original Jungle Hunt and Elevator Action SJ Taito PCBs. Processor transfer: The original Z80 is removed from the PCB and installed on the HighScoreSaves daughterboard unless a compatible processor option is selected. ROM Saver: Remove only the original program ROMs identified in the installation guide when using ROM Saver features. Before power-up: Verify Pin 1 orientation, processor alignment, socket condition, and every processor pin before restoring cabinet power. Install guide: View/Download Elevator Action Multigame Install Guide (PDF) Games Included Elevator Action Taito’s classic espionage arcade action game with elevators, agents, secret doors, and fast-paced mission gameplay. Jungle King / Jungle Hunt Classic jungle adventure arcade gameplay with vine swinging, underwater action, crocodile jumps, and survival challenges. Pirate Pete A pirate-themed Taito variation with alternate presentation on compatible original Taito SJ hardware. Time Tunnel Classic Taito arcade gameplay with time-travel themes, maze action, shooting, and fast scoring opportunities. Space Seeker Vintage Taito space-shooter action with classic enemy patterns, scoring, and arcade challenge. Seafighter Poseidon Underwater arcade shooting gameplay with naval combat, sea-based enemies, and classic Taito action. Standard and Optional Wi-Fi Versions Compare Standard and Wi-Fi Kits The Standard Kit saves supported scores locally to the PCB and does not require an internet connection for gameplay, Free Play, game selection, settings-menu operation, or local score saving. The optional Wi-Fi Enabled Kit includes the same local features and adds online score syncing through the HighScoreSaves global leaderboard platform. View Global Arcade High Scores Elevator Action Multigame FAQ Which games are included with the HighScoreSaves Elevator Action Multigame Kit? The HighScoreSaves Elevator Action Multigame Kit includes Elevator Action, Jungle King, Jungle Hunt, Pirate Pete, Time Tunnel, Space Seeker, and Seafighter Poseidon. How many high scores does the Elevator Action Multigame Kit save? The kit stores Top 5 scores with initials for each supported game using serial EEPROM storage. Does the Elevator Action Multigame Kit support Free Play and Coin-Up operation? Yes. The kit supports Free Play while retaining traditional Coin-Up operation when Free Play is disabled. How is the Elevator Action Multigame selection menu opened? Hold Player 1 Start for about four seconds during attract mode to open the multigame selection menu. How is the HighScoreSaves settings menu opened? Hold Player 1 Start while turning the cabinet on, then release the button when the on-screen prompt tells you to continue. Which Taito SJ PCBs are supported? The kit is designed for documented compatible original Jungle Hunt and Elevator Action SJ Taito PCBs. Does the Elevator Action Multigame Kit installation require soldering? Not when the Z80 location already has a compatible 40-pin socket. If the Z80 is soldered directly to the PCB, a qualified arcade technician must install a compatible socket. What does ROM Saver do on the Elevator Action Multigame Kit? ROM Saver allows designated original program ROMs to be removed when using supported ROM Saver features, helping reduce heat, power draw, and wear on original ROMs. Is Wi-Fi required for the Elevator Action Multigame Kit? No. Standard kits save supported scores locally. Wi-Fi is optional for online leaderboard support. Designed and supported by HighScoreSaves for arcade collectors, restorers, and original hardware enthusiasts. Resources 1. Elevator Action Multigame Install Guide (PDF) 2. What’s a Wi-Fi Enabled Kit or Standard Kit? 3. HighScoreSaves Tips and Tricks 4. HighScoreSaves YouTube Channel 5. HighScoreSaves Facebook Page