Darksoft Multigame Kits

Darksoft Namco System 2 Multigame Kit Overview The Darksoft Namco System 2 Multigame Kit is designed for original Namco System 2 arcade hardware, allowing multiple System 2 game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want expanded game access without compromising original hardware behavior. Compatibility and Hardware Requirements Compatible with original Namco System 2 hardware Board revision compatibility must be verified before installation Stable power delivery is required for reliable operation Connector condition and socket integrity should be checked Not compatible with CPS, Neo Geo, or non-System 2 platforms Installation Notes Namco System 2 multigame installation requires familiarity with arcade PCB handling, voltage adjustment, and board revision identification. Improper setup may result in instability. This product is recommended for users experienced with arcade hardware installation. View all available Darksoft Namco System 2 Multigame Kits . To use this kit you need a working Namco System 2 motherboard and either a cabinet or a supergun. Note: there are multiple System 2 revisions; only boards with the correct Video Board are compatible with this multi. Install Guide Requirements Namco System 2 motherboard with the compatible Video Board revision. Working JAMMA cabinet or a supergun setup. General arcade PCB handling practices (ESD safety, proper power, etc.). Shipping Information Please note: Ships with signature required and insurance. Typical dispatch: 48–96 hours. Contact us with any concerns. USA Ships via USPS or UPS at the discretion of Highscoresaves.com based on size/weight. International Expedited International Shipping (2–5 business days) via UPS for any order containing a Darksoft product. Customs/taxes/import fees may apply and are the customer’s responsibility. A phone number is required for all international shipments. We cannot under-declare values. Suggested tariff code: 95049080. Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — Namco Hardware Support If something isn’t working, please post on the forums or email us before assuming “it doesn’t work.” These kits are tested extensively. FAQs What hardware do I need? A Namco System 2 motherboard with the correct Video Board, plus a JAMMA cabinet or supergun. Do all System 2 boards work? No. Only revisions with the compatible Video Board are supported. Where can I find the install manual? Use the button above to download the PDF install guide. How is the item shipped? Signature and insurance included. Usually ships within 48–96 hours; USA via USPS/UPS; International via UPS. Where can I get technical help? Visit the Arcade Projects Namco forum.

Darksoft Neo Geo MVS Multigame Kit Overview The Darksoft Neo Geo MVS Multigame Kit is designed for original SNK Neo Geo MVS arcade hardware, allowing multiple MVS game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want expanded game access without compromising original hardware accuracy. Compatibility and Hardware Requirements Compatible with original SNK Neo Geo MVS systems Supports single-slot and multi-slot MVS configurations Stable power delivery is required for reliable operation Cartridge slot condition should be verified prior to installation Not compatible with AES consoles or non-MVS systems Installation Notes Neo Geo MVS multigame installation requires familiarity with cartridge-based arcade hardware, power adjustment, and cabinet wiring. Improper setup may result in instability. This product is recommended for users experienced with arcade hardware installation and troubleshooting. View all available Darksoft Neo Geo MVS Multigame Kits . This is a preorder of the limited run of Neo Geo MVS Multigame cartridge. It is expected to ship out around January 31, 2026. Install Guide Install Guide Features Compatible with every existing Neo-Geo game, homebrew, or your own developed Neo-Geo software. Offers 3 simultaneous virtual slots per MVS slot—load more MVS games at once. Each slot provides 768 Mbit of memory (fits the largest officially released game). microSD slot for adding games/software anytime; supports FAT32 and long filenames. Runs unpatched original ROMs. Fast, flexible menu with multiple navigation modes and music. User-configurable options; saves soft DIP settings per game. Saves High Scores per game. Switch regions without a bootleg BIOS. Call the menu anytime during gameplay with a joystick+button combo. Switch slots anytime during gameplay with a joystick+buttons combo. 8-layer PCB with Altera Cyclone IV, DDR memory, Flash memory, and ARM processor. Low-power, high-density design. Firmware and menu are updateable by adding files to the microSD. DDR technology loads even the largest game in < 18 seconds (vs. minutes on flash-only tech). Requirements Neo Geo MVS motherboard. Working cabinet or a supergun setup. Standard arcade PCB handling practices (ESD safety, correct power, etc.). Shipping Information Please note: Ships with signature required and insurance. Typical dispatch: 48–96 hours. Contact us with any concerns. USA Ships via USPS or UPS at HighScoreSaves’ discretion based on size/weight. International UPS Expedited International (2–5 business days) for orders containing a Darksoft product. Customs/taxes/import fees may apply and are the customer’s responsibility. A phone number is required for all international shipments. We cannot under-declare values. Suggested tariff code: 95049080. Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — MVS Hardware Support If something isn’t working, please post on the forums or email us before assuming it doesn’t work. These kits are tested extensively.

Darksoft CPS1 Multigame Kit Overview The Darksoft CPS1 Multigame Kit is designed for original Capcom CPS1 arcade hardware, allowing multiple CPS1 game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want flexibility without compromising original hardware accuracy. Compatibility and Hardware Requirements Compatible with original Capcom CPS1 boards Correct voltage adjustment is required for stable operation Board revision compatibility must be verified prior to installation Not compatible with CPS2, CPS3, or non-CPS systems Installation Notes CPS1 multigame installation requires attention to power delivery, board condition, and cabinet wiring. Improper voltage levels or poor connections may result in instability. This product is recommended for users familiar with arcade hardware installation practices. Install Guide Key Features Full compatibility: Every CPS-1.5 QSound game works just like original hardware. Flexible for devs & modders: Ideal for trainers, hacks, new game development, or just having fun. Flash memory based: The loaded game persists until you write a new one—no reloading each boot. LCD selector included: Connects to the Multi PCB to browse microSD and load games. B-Board replacement: The Multi PCB replaces your existing B-Board. See the guide for installation details. Handle with care: Grip by the sides only—large PCB with many parts; avoid flexing or stressing components. microSD workflow: Store games on microSD; insert/remove anytime except during game loading or firmware update. Adjustments: Trim pot near microSD sets LCD contrast. Another trim pot near the RCA output sets QSound volume over JAMMA. Use the A-Board pot for CPS-1 title volume. Attention A microSD card (not included) is required to run games. Use Arcade Projects to locate legal game content. Discharge static by touching ground before handling this or any arcade PCB. Shipping Information Please note: Ships with signature required and insurance. Typical dispatch: 48–96 hours. USA Ships via USPS or UPS at our discretion. International Expedited UPS Worldwide (2–5 business days) for any Darksoft order. Customs fees may apply (customer responsibility). A phone number is required for all international shipments. We cannot under-declare. Suggested tariff code: 95049080 Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — Capcom CPS-1 If something isn’t working, please post on the forums or email us before assuming “it doesn’t work.” These kits are tested extensively. FAQ Which mainboards are supported? Every Short Version CPS-1 mainboard is supported. Does it run CPS-1.5 QSound games? Yes—full CPS-1.5 QSound support just like original hardware. How do I load/select games? Use the included LCD selector to browse the microSD and flash a game. Does the selected game persist? Yes, flash memory retains the game until you write a new one. Can I remove the microSD while powered? Yes — except during game loading or firmware updates. How do I adjust audio and LCD? LCD contrast: trim pot near microSD. QSound volume: trim pot near RCA. CPS-1 volume: adjust A-Board pot. Any handling tips? Handle by the PCB edges; avoid flexing. Ask if uncertain. How is it shipped? Signature and insurance included. Dispatch 48–96 hours. USA via USPS/UPS; International via UPS.

LCD Protector Case for Darksoft CPS1, CPS2, and Taito F3 Multigame Kits Need an LCD protector case for your Darksoft multigame kit? This snap-fit LCD protector case is designed to securely house the LCD selector screen used on Darksoft CPS1, Darksoft CPS2, and Darksoft Taito F3 multigame kits. Assembly requires no additional hardware—simply seat the LCD into the rear housing and snap the front portion of the case into place. The enclosure includes an integrated rear stand that positions the LCD at an ideal viewing angle for installation inside a coin door or cabinet interior. Cable length requirements may vary by cabinet layout; longer LCD extension cables are available separately if needed. This enclosure is produced with a textured 3D print finish for improved appearance and durability. Please review the product photos for surface detail—this finish provides a cleaner, more professional look than standard smooth 3D printed cases. Included 1 × LCD protector case body 1 × integrated rear stand This is a 3D printed LCD protector enclosure designed specifically for the LCD selector screens used with Darksoft CPS1, CPS2, and Taito F3 multigame kits. This product is a supporting accessory and does not function independently. The LCD screen and connecting cables are not included.

LCD Extension Cable for Darksoft CPS1, CPS2, and Taito F3 Multigame Kits This LCD extension cable is designed to support the LCD selector screens used with Darksoft CPS1, Darksoft CPS2, and Darksoft Taito F3 multigame kits. It allows the LCD display to be mounted farther from the multigame board, providing greater flexibility when installing the screen inside a coin door or arcade cabinet interior. This accessory is intended as a supporting component and does not function independently without a compatible Darksoft multigame kit. What’s Included 1 × LCD extension cable — approximately 3 feet (100 cm) in length, equipped with the correct 7×2 female connectors for direct plug-and-play use

Darksoft CPS2 Key Writing Adapter Cable (Champion Edition) The Darksoft CPS2 Key Writing Adapter Cable is required when using a Darksoft CPS2 Multigame Kit – Champion Edition with original, untouched CPS2 ROM sets. This 4-wire harness connects the multigame kit’s J18 header (located next to the microSD slot) to the CPS2 B-board key connector, enabling key-writing functionality supported by Champion Edition firmware. This cable is intended for arcade collectors and technicians working with original Capcom CPS2 hardware who wish to preserve authentic ROM operation while using a Darksoft multigame solution. What This Cable Does Connects the Darksoft CPS2 multigame J18 header to the CPS2 B-board key connector. Implements the key-writing signals: DATA, CLOCK, SETUP1, and SETUP2. Allows use of original, unmodified CPS2 ROM sets when supported by Champion Edition firmware. Approximate overall length: 6 inches for clean internal routing. Compatibility Compatible with Darksoft CPS2 Multigame Kit – Champion Edition only. Connector location and installation method vary by CPS2 B-board revision. CPS2 B-Board Revisions with CN9 (No Soldering) Supported revisions: 93646B-5, 93646B-6, 93646B-7, 97691A-3. These boards include the on-board CN9 key connector. Multigame (J18) Pin Signal B-Board Connector #2DATACN9 #2 #3CLOCKCN9 #3 #4SETUP1CN9 #4 #5SETUP2CN9 #5 CPS2 B-Board Revisions without CN9 (Solder Required) Revisions 93646B-3 and 93646B-4 do not include the CN9 connector. For these boards, the key-writing signals must be soldered directly to CN2. Multigame (J18) Pin Signal CN2 Pin #2DATAA32 #3CLOCKA30 #4SETUP1A31 #5SETUP2A29 Installation Notes Ensure the system is powered off and fully discharged before installation. For CN9-equipped boards, connect the cable between J18 and CN9, observing proper pin orientation. For CN2-only boards, solder the four wires to the specified CN2 pins and insulate all connections. Route the harness carefully to prevent pinching or stress when reassembling the cartridge shell. What’s Included 1 × Darksoft CPS2 Key Writing Adapter Cable (4-wire, approx. 6 inches, black conductors) Gallery images may show prototype or installed examples. Final production cables use black wire insulation throughout.

Darksoft CPS2 Multigame Kit The Darksoft CPS2 Multigame Kit is designed for use with original Capcom CPS2 arcade hardware, allowing multiple CPS2 game titles to be run from a single multigame solution. This kit is intended for arcade collectors, operators, and restoration enthusiasts who want flexibility while preserving original gameplay behavior, timing, and hardware accuracy. Unlike battery-backed CPS2 boards that are prone to failure over time, Darksoft CPS2 multigame kits remove battery-related risks while maintaining compatibility with original CPS2 B-boards. Proper installation, voltage adjustment, and hardware handling are essential for stable, long-term operation. Install Guide Key Features Play the full CPS2 library on original hardware. This is not emulation — games run directly on genuine CPS2 base hardware. All-in-one CPS2 solution: Load supported CPS2 titles onto a microSD card and select them directly from the kit. Original B-board support: Installs on an original CPS2 B-board (all original ROMs must be removed). Flash-based operation: The selected game remains stored in flash memory until a different title is written. Attention A microSD card (not included) is required. Refer to the Arcade Projects forum for information on supported games and usage. Observe proper ESD safety and discharge static before handling the cartridge or motherboard. Shipping Information Please note: Ships with signature required and insurance. Typical dispatch time is 48–96 hours. USA Ships via USPS or UPS based on size and weight. International Expedited UPS International shipping (2–5 business days). Customs duties and import fees are the responsibility of the buyer. A phone number is required for international shipments. Suggested tariff code: 95049080. Technical Support CPS2-specific technical questions can be searched and discussed on the forum below: ArcadeProjects.com — Capcom CPS2 These kits are thoroughly tested. If issues arise, please consult the forum or contact us before assuming hardware failure. View all available Darksoft CPS2 Multigame Kits . FAQs Is this emulation? No. Games run on original CPS2 hardware. Which board is required? An original CPS2 B-board with all ROMs removed. How are games loaded? Supported titles are placed on a microSD card and selected via the kit. Does the selected game persist? Yes. The game remains stored until another is written. Any handling precautions? Yes. Follow proper ESD safety when handling CPS2 hardware. How is it shipped? Signature-required with insurance. USA via USPS/UPS; international via UPS.

Darksoft ST-V Multigame Kit Overview The Darksoft ST-V Multigame Kit is designed for original Sega ST-V (Titan) arcade hardware, allowing multiple ST-V game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want expanded game access without compromising original hardware behavior. Compatibility and Hardware Requirements Compatible with original Sega ST-V (Titan) systems Motherboard and cartridge compatibility must be verified Stable power delivery is required for reliable operation Cartridge condition and connector integrity should be checked Not compatible with CPS, Neo Geo, or non-ST-V systems Installation Notes ST-V multigame installation requires familiarity with cartridge-based arcade hardware, proper power adjustment, and careful handling of connectors. This product is recommended for users experienced with arcade hardware installation and troubleshooting. View all available Darksoft ST-V Multigame Kits . The Dark Knight Edition ST-V Multigame kit updates the classic design: the cart plugs into the four motherboard connectors (not the standard game cart slot) for extra stability and room for new features. Install Guide Key Features New form factor: Fits into the four ST-V motherboard connectors for improved rigidity and feature space. Selectors: Choose games via the included LCD, or the optional OLED selector that lets you browse by images. Both can operate in parallel. Integrated sound: Sound kit is built-in. You’ll hear audio prompts for start/end of flashing directly from the cab speakers. Flash memory: The selected game remains stored until you change it. Status feedback: Two LEDs illuminate during programming; one LED remains when finished. Optional WAV files (SoundsStart.wav, SoundsEnd.wav) can play at those moments. Sound PCB support: Plug in a compatible Sound PCB to enjoy enhanced audio on titles like Batman and others. Audio outputs: The cart can emit sounds and supports connection of a speaker to SP+/SP-. microSD workflow: Insert/remove the microSD card anytime—except during updates. Attention A microSD card (not included) is required to run games. Check the Arcade Projects forum for available games. If you are not legally entitled to play any game or sound, you must delete it. As with any arcade PCB handling, discharge static by touching ground before handling the cart or motherboard. Shipping Information Please note: This product ships with signature required and insurance. Typical dispatch is within 48–96 hours. USA Ships via USPS or UPS, at the sole discretion of Highscoresaves.com depending on size/weight. International Expedited International Shipping (2–5 business days) via UPS is used for any order containing a Darksoft product. Customs/taxes/import fees may apply and are the customer’s responsibility. A phone number is required for all international shipments. We cannot under-declare values. Suggested tariff code: 95049080. Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — SEGA ST-V (Titan) If there is any issue with the kit or something isn’t working, please post on the forums or email us before concluding “it doesn’t work.” This cartridge has been tested extensively. FAQs What’s included with the Dark Knight Edition kit? Game PCB (as pictured), LCD cable, and LCD screen. How do I select and flash games? Use the included LCD menu, or the optional OLED selector (browse by images). Both can be connected simultaneously. Does it include a separate sound kit? No—sound support is integrated. You’ll hear start/end programming sounds through the cab speakers (optional WAVs supported). Will the selected game persist after power off? Yes. Flash memory retains the game until you choose a new one. Can I hot-swap the microSD card? Yes, except during updates. Never remove the card while updating. Where can I learn about available games? See the Arcade Projects ST-V forum. Remove any content you’re not legally entitled to use. How is the item shipped? Signature and insurance are included. Typically ships within 48–96 hours via USPS/UPS (USA) or UPS (International). Are there any handling precautions? Yes. Discharge static before handling the cart or motherboard (as with any arcade PCB).

Darksoft Taito F3 Multigame Kit Overview The Darksoft Taito F3 Multigame Kit is designed for original Taito F3 arcade hardware, allowing multiple F3 game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want flexibility without compromising original hardware accuracy. Compatibility and Hardware Requirements Compatible with original Taito F3 hardware Cartridge and motherboard compatibility must be verified Correct voltage adjustment is required for stable operation Not compatible with CPS1, CPS2, or non-F3 systems Installation Notes Installation requires careful handling of F3 cartridges and attention to power delivery and connector condition. This product is recommended for users experienced with arcade hardware installation and troubleshooting. View all available Darksoft Taito F3 Multigame Kits . Install Guide Key Features Flash memory: Works like CPS2 multi—the selected game stays in flash until you write a new one. Two selectors: Use the included LCD or the optional OLED selector (browse by images). Both can be connected in parallel. Perfect fit: Cartridge fits the Taito F3 cart slot; some regions may require a connector mod. Handle with care: Grip the PCB by the sides—avoid pushing/pulling from the center. It’s a large board and should be handled gently. microSD workflow: Store games on a microSD card and insert into the cart. You may insert/remove the card anytime, except during a game load or firmware update. LCD contrast: Trim pot near the microSD slot adjusts the LCD contrast. Attention A microSD card (not included) is required to run games. Check the Arcade Projects forum for information about available games. Remove any content you are not legally entitled to use. Discharge static by touching ground before handling the cartridge or motherboard (standard arcade PCB practice). Shipping Information Please note: Ships with signature required and insurance. Typical dispatch is within 48–96 hours. Contact us if you have concerns. USA Ships via USPS or UPS at the discretion of Highscoresaves.com based on size/weight. International Expedited International (2–5 business days) via UPS on any order containing a Darksoft product. Customs/taxes/import fees may apply and are the customer’s responsibility. A phone number is required on all international shipments. We cannot under-declare values. Suggested tariff code: 95049080. Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — Taito F3 If there’s any issue with the kit, please post on the forums or email us before assuming “it doesn’t work.” These carts are tested extensively. FAQs How do I change games? Use the LCD menu or the optional OLED selector (image browsing). Select a game from microSD and flash it to the cart. Does the game persist after power off? Yes. The selected game remains in flash until you write a different one. Can I remove the microSD card while powered? Yes, except during a game load or firmware update. The LCD looks washed out—how do I fix it? Adjust the contrast using the trim pot near the microSD slot. Do I need to modify anything for my region? Some regions may require a connector modification for the cartridge to fit correctly. Where can I find compatible games and support? Visit the Arcade Projects Taito F3 forum. Remove any content you’re not legally entitled to use. How is the item shipped? Signature and insurance included. Usually ships 48–96 hours after order. USA via USPS/UPS; international via UPS.

Darksoft CPS3 Multigame Kit Overview The Darksoft CPS3 Multigame Kit is designed for original Capcom CPS3 arcade hardware, allowing multiple CPS3 game titles to be run from a single multigame solution. This kit is intended for arcade collectors and technicians who want expanded game access without compromising original hardware behavior. Compatibility and Hardware Requirements Compatible with original Capcom CPS3 systems Requires a compatible CPS3 security cartridge Stable power delivery is required for reliable operation CD-ROM drive condition should be verified prior to installation Not compatible with CPS1, CPS2, or non-CPS systems Installation Notes CPS3 multigame installation requires familiarity with CPS3 hardware, cartridge handling, and CD-ROM based systems. Improper setup or power issues may result in loading or stability problems. This product is recommended for experienced arcade technicians. View all available Darksoft CPS3 Multigame Kits . No more long loading times. The UltraSIMM has 8× the capacity of a regular SIMM so you can load up to eight CPS-III games and switch without painful waits. Install Guide Helpful Tips & Tricks Two adapter boards compatible with TL86_PLUS (PROMAN) are included. You’ll need a TL86_PLUS / PROMAN programmer (typically around $85; not included). Each SIMM has a different pinout—match the SIMM type to the correct adapter. Programming the SIMMs 64 Mb SIMMs (two flash chips): program using the adapter labeled “Adapter SIMM 512 (TL86)” with a switch. 128 Mb SIMMs (one flash chip): program using the adapter labeled “Adapter SIMM 1G (TL86)” (no switch). Programming is straightforward and takes ~3 minutes per SIMM. Note: The kit requires a new BIOS that will be published on the forum. Works only with carts that have standard SH-2 processors. After installation you can switch between games with a 3-position DIP switch (power cycle required). Dip-Switch Game Config Example 111 — Street Fighter III: New Generation (SF3NG) 110 — Warzard / Red Earth 101 — Street Fighter III: 2nd Impact 100 — JoJo 011 — JoJo’s Bizarre Adventure 010 — SFIII: 3rd Strike (slot 1) 001 — SFIII: 3rd Strike (slot 2) 000 — SFIII: 3rd/“4th Strike” variant Attention A microSD card (not included) is required to store games. See the Arcade Projects forum for information on available games. Remove any content you’re not legally entitled to use. As with any arcade PCB, discharge static by touching ground before handling the board or motherboard. Shipping Information Please note: Ships with signature required and insurance. Typical dispatch: 48–96 hours. Contact us with any concerns. USA Ships via USPS or UPS at the sole discretion of Highscoresaves.com based on size/weight. International Expedited International (2–5 business days) via UPS for any order containing a Darksoft product. Customs/taxes/import fees may apply and are the customer’s responsibility. A phone number is required for all international shipments. We cannot under-declare values. Suggested tariff code: 95049080. Tech Support via Forum Tech questions can be searched and asked on the forum: ArcadeProjects.com — Capcom CPS-III If there’s any issue with the kit, please post on the forums or email us before assuming “it doesn’t work.” These carts are tested extensively. FAQs How many games can UltraSIMM hold? Up to eight CPS-III games (8× the capacity of a standard SIMM). Do I need a programmer? Yes. Use a TL86_PLUS (PROMAN) programmer. Two compatible adapters are included; the programmer is not. Which adapter do I use? 64 Mb SIMMs use the “Adapter SIMM 512 (TL86)” with switch; 128 Mb SIMMs use the “Adapter SIMM 1G (TL86)” without switch. How long does programming take? About 3 minutes per SIMM. What BIOS/cart compatibility is required? A new BIOS (released on the forum) is required. Works only with carts that have standard SH-2 processors. How do I switch between games? Use the 3-position DIP switch; power cycle to apply the selection. Can I remove the microSD while powered? Yes—except during programming/game load or firmware updates. Where can I get support? Visit the Arcade Projects CPS-III forum.